Infographic: How To Remove Window Tint Bubbles

Tinting your car windows is an excellent way to protect you from the sun and make your car look cooler at the same time. If you haven’t had your windows tinted yet, one of the most frustrating things that you might experience is when bubbles started to develop on the window tints. 

Different factors cause bubbles from window tints, and removing them shall be no problem if you follow these instructions. There are various ways of eliminating bubbles present on car window tints, and supporting them saves you money. 

What Causes Window Tint Bubbles? 

Window tints are bubbly because of the water trapped between the window and the dye. Bubbles in the window tints are normal after a few hours of installation. But, if your window tints still have bubbles after two weeks, this is a sign of poor quality installation. Bubbling can also occur if your window tints are losing its adhesive properties. 

How To Remove Window Tint Bubbles? 

If your window tints are old, it is advisable to have window tints re-installed on your car windows rather than doing these instructions on removing window tints. But, if your dyes are still new and you want to remove the bubbles, here are some ways you can do so. 

Step One: Applying Heat 

Applying a little heat on your tint films is a way of removing those annoying bubbles. The heat weakens the adhesive and softens the film so you can easily manipulate the window tints. Using a heat gun or a hairdryer is the right way of heating the window tints. However, you conserve much electricity if you let your car out on a hot day.

Step Two: Soap and Water

After having your car windows exposed in heat, the next thing you want to have is a mixture of soap and water inside a spray bottle. The combination is needed to weaken and allow the adhesive of the window film to be malleable. Spray the mixture of soap and water on the area that you want to repair. Always keep the window tint hydrated throughout the process.

Step Three: Pinning Bubbles  

On the next level, what you will need is a sharp and pointed pin or needle. Prick a small hole in the center of every bubble. Remember to pierce the tiniest possible you could ever do and be careful, or else you might tear the whole film. 

Step Four: Squeegee-ing The Air 

This is the part where you press the air bubbles out of the window tint. By doing so, you will need a squeegee, or if you do not have one, hard plastic like a credit card will do. If you have one of these items, you can now proceed with getting the air bubbles out by gently scraping the air bubbles out. Too much pressure could tear the film, so be careful when taking the air out. 

The best option when bubbles occur is to go to a trusted window tinting company and see what they can do to remove the bubbles. If you want to have superior-quality tints, you can always visit Global Tint USA. To learn more about our top-notch window tinting services, visit our website today at www.globaltintusa.com

One comment
  1. Heya i’m for the first time here. I found this board and I to find It truly useful &
    it helped me out much. I’m hoping to present something again and help others like you aided me.

Add Comment

Required fields are marked *. Your email address will not be published.